StickFree Yoke Fix for Turtle Beach VelocityOne Flight

Description

The Turtle Beach VelocityOne Flight¹ is excellent flight simulation hardware, but many owners run into the same problem: a sticky yoke. The yoke shaft drags against the plastic housing as you push and pull, so pitch inputs stick, then jump. It is most noticeable during precision flying like landing flares and holding altitude, and it gets worse when you put downward pressure on the yoke.

The StickFree Yoke Fix is a bolt-on bearing mod that fixes the Velocity One yoke sticking issue at its source. Rolling bearings grip the shaft from all sides, keep it centered, and stop it from rubbing against the housing. The result is smooth, predictable pitch control in Microsoft Flight Simulator (MSFS 2020 and 2024), X-Plane, and any other sim.

Why the VelocityOne Yoke Sticks

In the factory design, the yoke shaft slides through the base with nothing holding it in the center. Any side-to-side or downward load pushes the shaft into the surrounding plastic, and that friction causes the sticking and binding. Wiping the shaft down can help, but the shaft still rubs against the housing. StickFree removes the contact itself.

How It Works

The mod consists of two precision-printed PETG-CF halves that clamp around the yoke housing where the shaft emerges. Quality bearings mounted in each half provide 360-degree rolling support for the shaft, preventing any metal-to-plastic contact that causes the sticking sensation. The design does not interfere with the full forward and backward travel of the yoke.

Technical Features

• Material: Black PETG-CF (carbon fiber reinforced) for exceptional rigidity and strength
• Bearings: Quality bearings for smooth, long-lasting operation
• Design: Two-piece clamshell design for easy installation
• Finish: Clean matte black finish matches VelocityOne¹ hardware

Installation

Installation takes approximately 5-10 minutes. The only tool required is a Phillips head screwdriver.

1. Separate the two halves (shipped connected together)
2. Position the halves around the yoke’s outer portion on the base of the controller
3. Begin threading the screws, taking care to align the M4 nuts properly to avoid cross-threading
4. Hand-tighten both sides evenly
5. Tighten until it becomes difficult to spin the yoke by hand around the clamped surface
6. Verify both sides are tightened reasonably equally to maintain even pressure
7. Test yoke movement—it should now glide smoothly

Important: Do not overtighten. The halves should grip the yoke firmly but should not be forced fully together. Excessive pressure can damage the original plastic housing.

No modifications to your VelocityOne¹ are required. The mod is completely reversible.

FAQ

Q: Will this void my warranty?

A: The StickFree Yoke Fix does not require any permanent modifications to your VelocityOne¹. It clamps externally and can be removed at any time, returning your yoke to its original configuration.

Q: How much does this improve the sticking issue?

A: Most users report a significant reduction in the sticking sensation. The bearing support removes the shaft-to-housing contact that causes the problem in the factory design.

Q: Can I just lubricate the yoke shaft instead?

A: Turtle Beach advises against using lubricant, oil, or cleaner on the yoke’s mechanical parts. StickFree needs no lubricant. It keeps the shaft from touching the housing in the first place.

Q: Does it work on Xbox and PC?

A: Yes. StickFree is a purely mechanical fix, so it works on every platform the VelocityOne Flight¹ supports (Xbox Series X|S, Xbox One, and Windows PC) and with any sim, including Microsoft Flight Simulator 2020, Microsoft Flight Simulator 2024, and X-Plane.

Q: Does it fit the VelocityOne Flight Universal Control System?

A: Yes. StickFree fits the yoke on the Turtle Beach VelocityOne Flight Universal Control System¹. That is the full name Turtle Beach uses for the VelocityOne Flight.

Q: Is this compatible with other flight controllers?

A: This mod is specifically designed for the VelocityOne Flight¹ yoke system only.

Warranty

This product comes with a 2 year warranty to replace any damaged parts, even if damage is accidental, at no charge. Shipping charges may apply to non-US customers.

Reviews